posted on 2025-01-22, 02:19authored byDaniel M. Jimenez, Bret W. Butler
This data publication contains fire behavior package (FBP) data; primarily flame temperature, horizontal and vertical mass flow, fire intensity, as well as ocular rates of spread (ROS), wind speed and direction data from the Prescribed Fire Combustion and Atmospheric Dynamics Research Experiment (RxCADRE) project conducted in November, 2012. These experiments were conducted on 7 small replicate and 3 large operational prescribed burn blocks in longleaf pine ecosystems on Eglin Air Force Base in Okaloosa County, Florida. Data were collected using three separate sensor systems. The first included sensor/datalogger measurements of convective/radiant energy, temperature and mass flow released by the fire. The second was a digital video camera housed in a fire proof enclosure that recorded visual images of the fire behavior. The third was an array of broadly distributed HOBO micro station anemometers. Both FBP sensor packages and camera system were located nominally 0.5 meters above ground level. The anemometers were 3.05 meters above ground level. The raw data have been processed using calibration data and converted into engineering units. The data provides 10 Hz fire flux measurements (kW/m²), temperature (C), and mass flow (m/sec) in the vertical and horizontal direction per FBP. The anemometer data provide 1 second wind speed and direction as well as 3 second average wind spread, direction and maximum gust. These data were collected as part of a collaborative fire research campaign. The in-situ fire behavior data, in addition to the remote sensed fire behavior data (O'Brien et al. 2015) compliment the fire effects, fuels and atmospheric components of the RxCadre research design. The collaborative approach was novel to this large-scale set of experiments and provides potential users with a broad spectrum of fire related data collected in unison. A short summary of the RxCADRE project can be found in the full data download (\Supplements\RxCADRE_Project_Overview.pdf). Information about the RxCADRE project can also be found here: //www.fs.fed.us/pnw/fera/research/rxcadre/.
These data were collected using funding from the U.S. Government and can be used without additional permissions or fees. If you use these data in a publication, presentation, or other research product please use the following citation:
Jimenez, Daniel M.; Butler, Bret W. 2016. RxCADRE 2012: RxCADRE 2012: In-situ fire behavior measurements. Fort Collins, CO: Forest Service Research Data Archive. https://doi.org/10.2737/RDS-2016-0038